|
Current To Pressure Transmitter
Model: VIP-9000
 The VIP-9000 Current To Pressure Transmitter is an I/P or V/P transducer for interfacing electronic control panels to pneumatic valves. A 4...20 mA or 2...10 VDC (capable of delivering 20 mA) input signal is converted by the electronics to a 3 to 15 psi pneumatic signal to position dampers and valve actuators.
We have incorporated a very low air consumption industry standard valve with new electronics. This maintains the excellent reliabily of our previous models while providing flexible voltage or current inputs, new terminals and lower prices.
The VIP-9000 Current To Pressure Transmitter is available with our optional VIP-F10 10 micron or VIP-F02 0.2 micron in line filters to remove oil, water and dirt from the compressed air supply.
The VIP-9000 Current To Pressure Transmitter is supplied on a plastic track for easy installation.
Current To Pressure Transmitter Accessories
Pressure Gauge
| Size |
1 1/2" dia |
| Mount |
1/8" NPT back |
| Range |
0+30psi/0+200kPa |
| Accuracy |
2% |
| Movement |
Bourdon tube |
| Order # |
VIP-PG |
|
|
Mounting "T"
| Thread |
1/8" NPT female |
| Hose |
1/4" O.D./0.170 I.D. |
| Material |
Brass |
| Mount |
Through tab holes |
| Order # |
VIP-T |
|
|
Better Inline Filter
This filter is rated at 0.2 microns.
Changes colour when contaminated by oil.
Use to protect VIP-9000.
| Hose |
1/4" O.D./0.170 I.D. |
| Order |
# VIP-F02 |
|
|
Good Inline Filter
This filter is rated at 10 microns.
Does not change colour.
Use to protect VIP-9000 from dirt particles only.
| Hose |
1/4" O.D./0.170 I.D. |
| Order # |
VIP-F10 |
|
|
Data Sheet | Installation & Operation
|
