|
 SUMP-GARDŽ Vertical Centrifugal Pumps
Every wetted component in a Vanton SUMP-GARDŽ vertical pump, including the heavy-wall shaft sleeve, is offered in PVC, CPVC, PP, PVDF, and other non-metallic materials compatible with the pumped fluid. This eliminates corrosion and minimizes abrasion, resulting in lower maintenance, longer pump life, and contamination-free products. SG pumps are configured for sumps to 50 ft. (15 m) deep, and handle flows to 1450 gpm (330 m3/hr), heads to 245 ft. (85 m), and temperatures to 275°F (135°C).
SUMP-GARD pumps are ideal for the transfer and treatment of process fluids, plant effluents and industrial or municipal water and waste streams. They are available with vortex pump heads to pass sludges, slurries and stringy materials as well as fluids with solids to 3 inches (75 mm) in diameter.
|
|
|
|
|
The industry standard for dependable thermoplastic vertical pump design
|
|
|
|
|
Vanton SG models are available in polypropylene, PVC, CPVC and PVDF. They can be furnished in sizes from 1x1 to 6x4, in lengths to 20 ft, for flows to 1450 gpm, at heads to 245 feet and for use at temperatures to 275 F.
 For more information on the SUMP-GARDŽ SG, click here.
Click Here for Engineering Specifications
|
|
|
|
|
|
SGK cantilevered bearingless pump has dry run capability
|
|
|
|
|
Vanton SGK cantilevered sump pumps feature a large diameter, plastic sleeved, alloy steel shaft that eliminates the need for immersed bearings or bushings, allowing run-dry operation for extended periods. Rugged epoxy-coated cast iron motor bracket accommodates NEMA, IEC, and standard European motors. Lengths to six feet (2 m) (deeper with tailpipe), flows to 1000 gpm (227 m3/hr) at heads to 210 feet (64 m).
For more information on the SUMP-GARDŽ SGK, click here.
Click Here for Engineering Specifications
|
|
|
|
|
|
SGL "Giraffe" design overcomes depth and headroom restrictions
|
|
|
|
|
This patented construction of these thermoplastic sump pumps keeps all wetted components, including the segmented shaft sections and couplings, isolated from fluid contact. It simplifies and reduces costs associated with shipping, installation, and maintenance. In addition, it makes lengths to 50 feet (15 m) practical, and allows installation in areas with limited headroom. The pumps handle flows to 1450 gpm (330 m3/hr) against heads to 245 feet (85 m), and are available in the same choice of materials as standard SG pumps.
Click Here for Engineering Specifications
|
|
|
|
|
|
SGW vertical pump for semiconductor and OEM applications
|
|
|
|
|
The SGW centrifugal pump is a very compact, low-cost unit engineered for use with standard C-face motors, and designed for simple washdown of the motor area without contaminating the pumped product. It is ideal for OEM applications due to high reliability, long service life and low maintenance. It is the preferred choice for computer chip and water production, printed circuit board fabrication and other processes involving ultrapure water and chemicals. Rated for flows to 220 gpm (50 m3/hr) at heads to 125 feet (38 m), lengths to 22 inches (.56 m).
Click Here for Engineering Specifications
|
|
|
|
|
|
SGH integral pump/motor shaft design saves space and reduces maintenance
|
|
|
|
|
SUMP-GARD SGH pumps feature integral pump/motor shafts supported by large motor bearings. This low profile design simplifies maintenance and allows easy replacement of the plastic-sleeved stainless steel shaft. Thermoplastic construction of all wetted components ensures dependable pumping of corrosive and abrasive chemicals and wastes, and eliminates metallic contamination. Flows to 175 gpm (40 m3/hr), heads to 100 feet (30 m), and lengths to 3 feet (.9 m).
Click Here for Engineering Specifications
|
|
|
|
|
|
SGV vortex pump head for sludges, slurries and solids laden fluids
|
|
|
|
Vanton SUMP-GARD pumps with recessed, dynamically balanced clog-free impellers are suitable for a wide range of sludges and slurries, and fluids with stringy materials or solids to 3 inches (75 mm) in diameter. Wetted components of homogeneous thermoplastics eliminate corrosion and contamination, and minimize abrasion. SGV pumps are rated for flows to 900 gpm (205 m3/hr) at heads to 240 feet (73 m), with actual performance determined by the characteristics of the fluid being pumped.
|
|
