-
 Metering, transfer, self-priming, and low-pulsation models
-
Easy maintenance - disassembly not required
-
Rib-back hose for positive retention in pump and easy replacement without disassembly of the pump
-
Dry running design provides long tubing life and prevents system contamination should the hose ever rupture
-
Flow capacities are available up to 12.5 m3/hr (55 GPM) for single hose and up to 24.5 m3/hr (108 GPM) with our unique dual hose design
-
Hose rib is positively captured in the tube bed and prevents the hose from side-to-side movement, which shortens hose life in other pump designs
-
Pumps are shipped complete with motor and fixed-speed drive systems ready to install and start
-
Options include mechanical variable speed, variable-frequency, hazardous-area rated, washdown, chemical duty, air-operated, or bare-shaft pumps only
|
Specifications:
|
|
Housing :
|
Cast aluminum with epoxy coating
|
|
Tube bed :
|
PTFE
|
|
Inlet/Outlet Fittings :
|
Polypropylene or 316 SS
|
|
Rollers :
|
Carbon-filled PTFE
|
|
Rotor :
|
Cast aluminum
|
|
Shaft :
|
Stainless steel
|
|
Bearings :
|
Permanently sealed grease filled ball bearings
|
|
Hose Material Options :
|
Natural rubber, food-grade rubber, Neoprene, Hypalon
|
|
Max rpm :
|
165
|
|
Max Temperature (continuous) :
|
60°C (140°F)
|
|
Max Temperature (intermittent) :
|
80°C (176°F)
|
|
Max Pressure :
|
2 bar (30 psig)
|
|
Max Suction Height :
|
7 m (23 ft)
|
|
Max Viscosity :
|
35,000 cP's (160,000 SSU)
|
|
