The miniature measuring probe with very small dimensions
and M5 x 0.5 mounting thread is particularly suitable
for direct installation in small-capacity combustion
engines with more than 2 valves per cylinder.
Type 6055BB uses a new
type of piezoelectric crystal with which a sensitivity of -20 pC/bar is achieved. This sensitivity over a temperature
range of 200 ±50°C varies by not more than ±0.5%.
The influence of engine vibrations on the measuring signal is
reduced by the passive acceleration compensation. The front seal allows good heat dissipation and thus a maximum short-time
probe operating temperature of 400°C.
• Particularly suitable for measurements with glow plug adapter Type 6535Q
• Good temperature stability of the sensitivity
• Acceleration-compensated
• Front diameter 4.4 mm
• Low thermal shock error and long life thanks to the front seal
• Very high sensitivity
The miniature measuring probe with very small dimensions
and M5 x 0.5 mounting thread is particularly suitable
for direct installation in small-capacity combustion
engines with more than 2 valves per cylinder.
