Kistler Models 9333, 9343, 9363 Press Force Sensor
These
ready-to-use piezoelectric force sensors are particularly
suitable for measuring rapidly changing compression forces
in presses. The press force sensors are supplied calibrated
and can be mounted in various ways. Three sizes (with
maximum measuring range of 50, 70 and 120 kN respectively)
are available.
The forces acting on the sensor produce in its piezoelectric element a proporational
electric charge. This is fed via the 10-32 UNF connector and shielded cable to an amplifier for recording of measured
values. A protector supplied as standard is very easily screwed onto the side connector for the cable.
• 3 calibrated measuring ranges (100%, 10% and 1%)
• Compact force sensor ready for easy mounting in connecting rods or plungers
• Double flange for maximum adaptability
• Central bore for ejection tools, etc.
• Can be used as force calibration sensor
• Suitable for monitoring joining processes
• SCS calibration (optional)
• Calibration of additional measuring range (optional)
These
ready-to-use piezoelectric force sensors are particularly
suitable for measuring rapidly changing compression forces
in presses. The press force sensors are supplied calibrated
and can be mounted in various ways. Three sizes (with
maximum measuring range of 50, 70 and 120 kN respectively)
are available.
