| Setra's Model 204, C204, 280E and C280E, when "factory installed" in this copper-free aluminum enclosure, are Factory Mutual Systems approved for use in hazardous locations and for use in NEMA 4 weatherproof environments. |
 |
Applications
- Process Instrument Signals
- Natural Gas Line Pressure
- Chemical Processing
- Outdoor Pressure Applications
- Off Shore Drilling Platforms
- Grain Processing
|
| Model 204-XP/C204-XP Specifications |
| Full Scale Pressure Output |
Model 204-XP (Voltage):
5 VDC |
Model C204-XP (Current):
20 mA |
| Zero Pressure Output |
0 VDC |
4 mA |
Accuracy
(RSS Method) |
±0.11% Full Scale (0.073% Full Scale, optional, and ±0.14% Full Scale for 10,000 psig range) |
| Type of Pressure |
Gage
Absolute
Vacuum |
| Pressure Ranges |
0 to 25, 50, 100, 250, 500, 1000, 3000, 5000, 10000 psig
0 to 25, 50, 100, 250, 500, 1000, 3000, 5000 psia
0 to 14.7 psiv |
| Thermal Effects |
- Compensated Range °F (°C):
- 30 to 160 (-1 to 65)
- %FS/100°F(100°C)max.zero:
- ±0.4 (±0.7)
- %FS/100°F(100°C)max.span:
- ±0.3 (±0.5)
|
| Media |
Gases or liquids compatible with 17-4PH stainless steel. (Hydrogen not recommended for use with 17-4PH stainless steel) |
| Model 280E-XP/C280E-XP Specifications |
| Full Scale Pressure Output |
Model 280E (Voltage):
5 VDC |
Model C280E (Current):
20 mA |
| Zero Pressure Output |
Internally adjustable to as low as 5 mV (30 mV nominal) |
4 mA |
Accuracy
(RSS Method) |
±0.11% FS (.073% optional) |
| Type of Pressure |
Gage
Absolute
Compound
P/I
|
| Pressure Ranges |
0 to 15, 25, 50, 100, 250, 500, 1000, 3000, 5000, 10000 psig
0 to 25, 50, 100, 250, 500, 1000, 3000, 5000 psia
-14.7 to 35, 50, 100 psig
3 to 15 P/I (C280E only) |
| Thermal Effects |
- Compensated Range °F (°C):
- 32 to 150 (0 to 65)
- %FS/100°F(100°C)max.zero:
- ±0.75 (±1.35) typ. (±2.0 [3.6] max zero)
- %FS/100°F(100°C)max.span:
- ±1.5 (±2.7) typ. (±2.0 [3.6] max span)
|
| Media |
Gases and liquids compatible with 17-4PH stainless steel. (Hydrogen not recommended for use with 17-4PH stainless steel.) |
| Enclosure |
| Materials of Construction |
- Housing:
- Virtually Copper-free Aluminum (<0.03% copper)
- Adapter:
- 303 Stainless Steel
- Sensor Body:
- 17-4PH Stainless Steel
|
| Connections |
- Pressure:
- 1/2 inch NPT External
- Electrical:
- Two 1/2 inch NPT Internal Conduit
- Mounting:
- Four 1/4 - 20 UNC 2B on 3/4" centers
|
| Weight |
- Weight:
- 3-1/4 lbs. (approximately)
|
* Specifications subject to change without notice.
If you don't see what you need here, please contact us.
|
